Europe (Ce); Maximum Power And Frequency Specifications - Digi XBee S2C DigiMesh 2.4 Kit Getting Started Manual

Regulatory information

Europe (CE)

The XBee S2C DigiMesh 2.4 Kits have been tested for European compliance and CE marked
accordingly, refer to www.digi.com/resources/certifications.
If the XBee S2C DigiMesh 2.4 Kits are incorporated into a product, the manufacturer must ensure
compliance of the final product with articles 3.1a and 3.1b of the Radio Equipment Directive
2014/53/EU. An EU Declaration of Conformity must be issued in accordance with the Radio Equipment
Directive 2014/53/EU and supplied with the product when it is placed on the European market. A copy
of the EU Declaration of Conformity must also be kept on file as described in the Radio Equipment
Directive.
Furthermore, the manufacturer must maintain a copy of the XBee S2C DigiMesh 2.4 Kit user manual
documentation and ensure the final product does not exceed the specified power ratings, antenna
specifications, and/or installation requirements as specified in the user guide.

Maximum power and frequency specifications

For the through-hole device:
Maximum power: 9.82 mW (9.92 dBm) Equivalent Isotropically Radiated Power (EIRP) at normal
n
condition.
Frequencies: 5 MHz channel spacing, beginning at 2405 MHz and ending at 2480 MHz.
n
For the surface-mount device:
Maximum power: 12.65 mW (11.02 dBm) EIRP.
n
Frequencies: 5 MHz channel spacing, beginning at 2405 MHz and ending at 2480 MHz.
n
XBee S2C DigiMesh 2.4 Kit Getting Started Guide
Europe (CE)
45