Update The Firmware Of Your Xbee Modules; Configure Remote Xbee Modules - Digi XBee S2C DigiMesh 2.4 Kit Getting Started Manual

Do more with your XBee devices

Update the firmware of your XBee modules

Radio firmware is the program code stored in the device's persistent memory that provides the
control program for the device. Use XCTU to update the firmware.
1. Click the Configuration working modes button
2. Add local and remote XBee modules to your computer. See
Configure remote XBee
3. Select a local or remote XBee module from the Radio Modules list.
4. Click the Update firmware button
The Update firmware dialog displays the available and compatible firmware for the selected
XBee module.
5. Select the product family of the XBee module, the function set, and the latest firmware version.
6. Click Update. A dialog displays update progress.

Configure remote XBee modules

You can communicate with remote devices over the air through a corresponding local device.
Configure the local device in API mode because remote commands work only in API mode. Configure
remote radio modules in either API or transparent mode.
These instructions show you how to configure the LT (Associate LED blink times) parameter on a
remote module.
XBee S2C DigiMesh 2.4 Kit Getting Started Guide
modules.
.
Update the firmware of your XBee modules
.
Add XBee modules to XCTU and
30