Filtration And Pump Control - PoolCop Installer And User Manual

P o o l C o p M a n u a l : V 3 1 E N
F
I L T R A T I O N A N D
4.4.4.1 Switch the Pump ON/OFF
4.4.4.1.1 Start the Pump
Normally, the filtration pump is controlled automatically by PoolCop using filtration in manual timer or automatic modes. If
however you want to run the pump at another time, or need to restart the pump after stopping it for any reason, this is done from
MANUAL CONTROL.
From the main POOLCOP display screen:
Press MENU.

Press SELECT (MANUAL CONTROL

Press SELECT (PUMP

Verify FILTER position is displayed.

Press SELECT (PUMP

Press SELECT; PUMP: ON

Press SELECT; the pump will run in the indicated valve

position.
Once the pump starts system pressure increases and

this will be displayed.
www.poolcop.com
P C
U M P O N T R O L
is preselected).
is preselected).
is preselected).
will display.
If the valve is in position Waste, Backwash or Rinse, pool water level will reduce.
If the valve is Closed, pump will not be allowed to start
Technical Support "Hotline" +33 (0)4 90 09 54 26
P O O L C O P
> Manual Control
Filtration Timer
Auxiliary Timers
Water and Treatment
Time/Date
Configuration
S E L E C T
M A N U A L
Pump
>
Auxiliaries
Pool Refill
Clean Filter
Valve Rotation
Measure pH
S E L E C T
S I N G L E S P E E D P U M P
> Pump
Speed
Valve
Pressure
S E L E C T
CAUTION:
NOTE:
P a g e | 5 9
M E N U
Q U I T
C O N T R O L
Q U I T
: OFF
: ---
: Filter
: 0.00 Bar
Q U I T
PCFR