Auxiliary Modes - PoolCop Installer And User Manual

P o o l C o p M a n u a l : V 3 1 E N
A M
U X I L I A R Y
Programme auxiliary timers, and set them as slaved to run with the pump only, or on specific day.
Whenever quitting the

AUXILIARY MODES

them ON or OFF as required to match programmed running times.
AUX channels 1-5 operate in the same manner.
AUX 6 can be used as a standard auxiliary, but when ORP Control is installed, AUX 6 is not available.
AUXILIARIES
TIMER
www.poolcop.com
O D E S
menu, PoolCop checks and adjust the status of the pump and auxiliaries, and switches
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
Technical Support "Hotline" +33 (0)4 90 09 54 26
ON
Set AUX 1 ON time HH:MM
OFF
Set AUX 1 OFF time HH:MM
Slave AUX 1 to filtration; the auxiliary will only be ON if
SLAVE
the valve is in FILTER or BYPASS and the pump is ON.
Day Of Week
Set AUX to operate on selected days of the week.
If PoolCop is managing a multispeed pump, AUX 1 is not
SPEED CTRL
available
See AUX1
AUX 2 functionality is the same as AUX 1.
See AUX1
AUX 3 functionality is the same as AUX 1.
See AUX1 AUX 4 functionality is the same as AUX 1. AUX 4 remains
available even when a multispeed pump is used.
See AUX1 AUX 5 functionality is the same as AUX 1. AUX 5 remains
available even when a multispeed pump is used.
WASTE Valve
if a waste valve is configured, AUX 5 is not available.
See AUX1
AUX 6 functionality is the same as AUX 1. AUX 6 remains
available even when a multispeed pump is used.
ORP
If ORP Control is installed, AUX 6 is not available.
P a g e | 5 5
PCFR