Install The Pressure Hoses - Raven AutoBoom Installation Manual

Install the Pressure Hoses

Pressure Hose Installed
FIGURE 9.
New Pressure Hose
Locate the pressure line on the machine's hydraulic valve (port P).
1.
Trace the pressure line back to the point it joins the steel hydraulic line.
2.
Disconnect the pressure line from the steel line.
3.
Connect the end of the pressure line to the fitting installed in Port EF of the AutoBoom valve.
4.
Connect the straight end of the supplied hydraulic hose (P/N 214-1000-302) to the machine's steel line.
5.
Connect the 90° end of the installed hose to the fitting installed in Port P of the AutoBoom valve.
6.
Manual No. 016-0230-005
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine's system may be
extremely hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material or contaminants
from being introduced into the machine's
hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valves.
PowerGlide Plus
17