Install The Ultraglide Sensors; Boom Sensor Mounting Locations - Raven AutoBoom Installation Manual
For case ih 3150; case ih 3185 tyler patriot open center
Hide thumbs
Also See for AutoBoom:
- Installation manual (92 pages) ,
- Calibration & operation manual (50 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Chapter 4
Install the UltraGlide Sensors
Boom Sensor Mounting Locations
Sensor mounting locations may be influenced by the boom configuration. If an object enters the sensor's blind
rage unexpectedly, a false echo return to the sensor could occur, causing the boom to drop and the sensor or
boom to be damaged. To ensure optimal operation of the UltraGlide system and to protect the sprayer boom,
the sensor should be mounted on the front side of the boom, 8 - 10" above the lowest hanging part of the
boom.
Illustration of Sensor's Blind Range
FIGURE 9.
Mount the Boom Sensors
Mounted Boom Sensor
FIGURE 10.
42
Case IH 3150/3185, Pre-2002 Tyler Patriot Open Center AutoBoom™ Installation Manual
WARNING
The machine must remain stationary and
switched off, with the boom unfolded and
supported, during installation or maintenance.
Advertisement
Table of Contents
