Install The Pressure And The Excess Flow Hoses - Raven SmarTrax Installation Manual

Chapter 4
Install the Pressure and the Excess Flow
Hoses
Locate the steering pump on the back of the transmission below the cab.
1.
Disconnect the existing pressure hose from the steering pump.
2.
Reroute the hose to the SmarTrax hydraulic valve and attach to the 'EF' Port.
3.
'EF' Port on Autosteer Valve
FIGURE 1.
Connect the supplied -10 JIC (F) hose (P/N 214-1000-732) to the open port on the steering pump.
4.
Route the other end hose to the SmarTrax hydraulic valve and attach to the 'P' Port.
5.
SmarTrax Hydraulic Valve
FIGURE 2.
12 Apache AS 20 Series SmarTrax Installation Manual
Attach Hose to
'EF' Port
'P' Port