Install The Pressure And Tank Hoses - Raven AutoBoom UltraGlide XT Installation Manual

INSTALL THE PRESSURE AND TANK HOSES

FIGURE 6. Machine's Pressure Hose
1. Locate and disconnect the existing pressure hose from the machine's hydraulic valve.
FIGURE 7. Pressure Hose Installed
Installed Hydraulic
Hose (P/N 214-1001-
055)
2. Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the fitting in the machine's
pressure port.
3. Connect the machine's pressure hose to the opposite end of the installed tee fitting.
4. Install the straight end of the supplied hydraulic hose (P/N 214-1001-055) on the 90° end of the installed tee
fitting.
Manual No. 016-0171-122 Rev. E
HYDRAULIC SYSTEM INSTALLATION
Installed Tee Fitting
(P/N 333-0012-069)
Machine's Pressure
Hose
27