Create A Booklet - Oce VarioPrint 2045-65 NC Job Manual

Create a booklet

Introduction
A booklet is a copied report that has a book format. The Océ VarioPrint
2045-65 NC copies four images on one copy sheet to create a booklet. You
must fold the copied sheets in order to create your booklet. The sequence of
the pages in the booklet is according to the sequence you feed the originals.
The booklet function includes several preset settings.
Before you begin
If the originals are different sizes and types, sort the set of originals into
■
separate job parts (see 'Copy separate job parts' on page 117).
Creating a booklet
Place the originals face down in the automatic document feeder.
1
Follow the feed direction according to the dimensions and orientation of the
information of the originals.
Select the 'Copy' mode
2
The 'Basic' section automatically opens.
Select '1-sided' or '2-sided' in the 'Original' function box.
3
Activate the 'Extra' section.
4
Open the 'Original type' card.
Keep the setting or change the original type.
Activate the 'Extra' section.
5
Open the 'Copy layout' card.
Select 'Booklet' .
6
[81] Select booklet
[81] Select booklet
The copy function
.
125