Oce VarioPrint 2045-65 NC Job Manual page 112

[14] The copy layout card
Function
'Layout'
'Margin
shift'
[14] The copy layout card
[65] The original type card
[65] The original type card
110 Océ VarioPrint 2045-65 NC Job Manual
Description of the function
The 'Normal' value is the default setting.
The 'Booklet' function allows you to create a finished booklet
(see 'Create a booklet' on page 125).
The properties of the booklet are defined by the feed direc-
tion, the selected paper size and the orientation of the infor-
mation on the originals.
Four default images are printed on one sheet of paper.
Some settings are disabled by the 'Booklet' setting.
See the result of the settings in the feedback box, next to the
'Copy type' function box.
The '2-images' function allows you to copy two original pag-
es on one side.
The 'Margin shift' function allows you to change the default
margin settings for the front and the rear pages from + 1 inch
down to - 1 inch.
See the result of the settings in the feedback box next to the
'Margin shift' function box.
Check to insure the increased margins do not result in lost im-
age information.