Oce VarioPrint 2045-65 NC Job Manual page 69

Wait until the interrupt symbol
2
[39] The interrupt mode is accepted
[39] The interrupt mode is accepted
Make the settings for the new job.
3
Press the start key
4
[40] Start a job in the interrupt mode
[40] Start a job in the interrupt mode
Repeat steps 3 and 4 for each subsequent job.
5
Press the interrupt key
6
The suspended copy job will continue.
[41] The suspended job continues
[41] The suspended job continues
The Océ VarioPrint 2045-65 NC automatically quits the interrupt mode
Note:
two minutes after the last job.
The print function
is displayed in the message box.
to start the new job.
to quit the interrupt mode.
67