Oce VarioPrint 2045-65 NC Job Manual page 110

[62] The paper input card
[62] The paper input card
[12] The paper input card
Function Description of the function
'Source'
'Tray'
'Special
feeder'
[12] The paper input card
108 Océ VarioPrint 2045-65 NC Job Manual
The 'Automatic' value is the default setting in the 'Source' func-
tion box.
The value changes to 'Tray' if you select a different size.
The selected size is related to the dimensions of the originals de-
tected by the automatic document feeder. You can change the
size.
The platen does not detect the dimensions of the originals so that
the default setting (8.5 x 11 from tray 4) is used, unless you
change the size.
Make sure that the orientation of the selected size matches the
feed direction of the originals.
The current size is displayed in the 'Paper' section.
If the orientation of the stock of paper in the tray does not match
the feed direction of the originals in the automatic document
feeder, the Océ VarioPrint 2045-65 NC rotates the the image 90°.
If rotation of the image occurs, a rotation symbol
in the 'Extra' section.
The 'Special feeder' value allows you to use special material,
such as an overhead sheet (see 'Input trays, output bins and ma-
terials' on page 182).
When you use the special feeder, select the paper size of the spe-
cial material (see 'Add paper to the special feeder' on page 171).
In addition to the standard sizes (11 x 17, 8.5 x 11 and 5 x 8), you
can insert special paper sizes in the special feeder (see 'Copy on
special material' on page 122).
The upper icon in the 'Size' function box provides several sizes
to select from.
is displayed