Oce VarioPrint 2045-65 NC Job Manual page 164

Improving the image quality if the originals are mainly text
Put and align the originals face down into the automatic document feeder.
1
Select the 'Scan' mode
2
The 'Workflow' section automatically opens.
Select a 'Scan profile' using the arrow keys
3
Activate the 'Original' section.
4
Select '1-sided' or '2-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of
5
the information and the binding edge of the originals.
Activate the 'Digital document' section.
6
Make sure that the 'Page size' card is open.
Select the size and the orientation of the required page in the 'Size' function
7
box.
Make sure that the orientation of the required page matches the feed direction
of the photo.
If the size of the digital document does not match the dimensions of your
Note:
photo, adjust the enlargement or reduction (see 'Make an enlarged or reduced
digital document' on page 157).
Activate the 'Digital document' section.
8
Open the 'Image quality' card.
Select 'Text' in the 'Optimize' function box.
9
Use the arrow keys
10
Press the start key .
11
162 Océ VarioPrint 2045-65 NC Job Manual
.
to adjust the 'Lighter or darker' value from 2 down to -2.
.