Oce VarioPrint 2045-65 NC Job Manual page 116

Open the 'Copy type' card.
7
Keep the setting or change the required copy type.
[70] The copy type card, if a 1-sided copy is selected
[70] The copy type card, if a 1-sided copy is selected
[71] The copy type card, if a 2-sided copy is selected
[71] The copy type card, if a 2-sided copy is selected
Select the number of copies.
8
Press the start key .
9
Copying a 8.5 x 11 original with the platen
Place and align the original face down on the platen.
1
Use the long-edge feed direction.
Select the 'Copy' mode
2
The 'Basic' section automatically opens.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Select the number of copies.
5
Press the start key .
6
114 Océ VarioPrint 2045-65 NC Job Manual
.