Table of Contents
Advertisement
Making an enlarged or reduced copy with the platen
Place and align the original face down on the platen.
1
Follow the feed direction according to the dimensions of the original.
Select the 'Copy' mode
2
The 'Basic' section automatically opens.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' card is open.
Select the required size and orientation in the 'Source' function box.
6
The selected size is displayed in the 'Paper' section.
[77] Select the paper size. The enlargement and reduction is not automatically adjusted
[77] Select the paper size. The enlargement and reduction is not automatically adjusted
Activate the 'Basic' section.
7
Adjust the 'Enlargement or reduction'.
The 'Enlargement or reduction' is shown in the 'Basic' section.
Use the arrow keys
[78] Select the enlargement and reduction
[78] Select the enlargement and reduction
Select the number of copies.
8
Press the start key .
9
The copy function
.
or
to select one of the preset values.
121
Advertisement
Table of Contents
