Oce VarioPrint 2045-65 NC Job Manual page 160

Before you begin
To insure that your scan job settings are correct, make a test copy. Make sure
■
that the settings do not result in lost image information or gray borders.
Making an enlarged or reduced digital document with the automatic document feeder
Place and align the originals face down in the automatic document feeder.
1
Follow the feed direction according to the dimensions and orientation of the
information on the originals.
Select the 'Scan' mode
2
The 'Workflow' section automatically opens.
Select a 'Scan profile' using the arrow keys
3
Activate the 'Original' section.
4
Select '1-sided' or '2-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of
5
the information and the binding edge of the originals.
Activate the 'Digital document' section.
6
Make sure that the 'Page size' card is open.
Select the size and the orientation in the 'Size' function box.
7
Check that the orientation matches the feed direction of the originals.
The enlargement or reduction is automatically adjusted.
[106] Select the size. The enlargement and reduction rate is automatically adjusted
[106] Select the size. The enlargement and reduction rate is automatically adjusted
Press the start key .
8
158 Océ VarioPrint 2045-65 NC Job Manual
.
.