Interrupting a copy job
Introduction
The interrupt mode allows you to begin another job while a job with many sets
is processed. The procedure to interrupt a job is as follows:
The interrupt key
■
The current copy job stops after the printing of the current set is complete.
■
The previously digitized information and the job settings are stored in the
machine's memory.
One or more copy, print or scan jobs can be started.
■
The interrupt key
■
The suspended copy job continues.
■
The Key Operator can disable the interrupt mode.
Note:
If a copy control device or an external finisher is connected to the Océ
Note:
VarioPrint 2045-65 NC, the interrupt mode is not available.
Before you begin
You can only enter the interrupt mode when the Océ VarioPrint 2045-65 NC
■
processes a job. The message box informs you when the Océ VarioPrint
2045-65 NC accepts the interrupt mode request.
Interrupting a copy job
Press the interrupt key
1
[85] Press the interrupt key
[85] Press the interrupt key
The copy function
is pressed to enter the interrupt mode.
is pressed to quit the interrupt mode.
while a copy job is processing.
131