Table of Contents
Advertisement
About the activity states of the Océ VarioPrint 2045-65 NC
Introduction
The message box gives you the information about the current state of the Océ
VarioPrint 2045-65 NC.
[5] The progress of a print job
[5] The progress of a print job
States of the machine
State
Machine is
switched off
Ready to start a
job
Ready to copy or
scan a next part
Ready to start a
job in the inter-
rupt mode
Introduction
Description
To switch the machine on, press the ON / OFF button on
the machine.
The machine needs eight minutes to warm up.
The machine is ready to copy, ready to print or ready to
scan.
The machine is ready to copy or scan a next job part.
The state is activated by the combine key .
The machine is ready to copy, to print or to scan in the
Interrupt mode.
The state is activated by the interrupt key
processing. The suspended job continues after the inter-
rupt mode is exited.
during job
21
Advertisement
Table of Contents
