Oce VarioPrint 2045-65 NC Job Manual page 156

Select the icon in the 'Original type' function box to define the orientation of
6
the information and the binding edge of the originals.
Press the start key .
7
Scanning a 11 x 17 original on the platen
Place and align the original face down on the platen.
1
Use the short-edge feed direction.
Select the 'Scan' mode
2
The 'Workflow' section automatically opens.
Select a 'Scan profile' using the arrow keys
3
Activate the 'Original' section.
4
Select '1-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of
5
the information of the original.
Activate the 'Digital document' section.
6
Make sure that the 'Page size' card is open.
Select the 11 x 17 size in the 'Size' function box.
7
[103] Select 11 x 17
[103] Select 11 x 17
If the required page size is not 11 x 17, adjust the enlargement or
Note:
reduction (see 'Make an enlarged or reduced digital document' on page 157).
Press the start key .
8
154 Océ VarioPrint 2045-65 NC Job Manual
.
.