Table of Contents
Advertisement
Making an enlarged or reduced digital document with the platen
Place and align the original face down on the glass plate.
1
Follow the feed direction according to the dimensions of the original.
Select the 'Scan' mode
2
The 'Workflow' section automatically opens.
Select a 'Scan profile' using the arrow keys
3
Activate the 'Original' section.
4
Select '1-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of
5
the information of the original.
Activate the 'Digital document' section.
6
Make sure that the 'Page size' card is open.
Select the size and orientation in the 'Size' function box.
7
Make sure that the orientation matches the feed direction of the original.
[107] Select the size. The enlargement and reduction is not automatically adjusted
[107] Select the size. The enlargement and reduction is not automatically adjusted
Adjust the 'Enlargement or reduction'.
8
Use the arrow keys
[108] Adjust the enlargement and reduction
[108] Adjust the enlargement and reduction
Press the start key .
9
The scan function
.
or
to select one of the preset values.
.
159
Advertisement
Table of Contents
