6
Enter the settings for the job part.
Activate the 'Original' section.
■
Select '1-sided' or '2-sided' in the 'Original' function box.
■
Select the icon in the 'Original type' function box to define the orientation
■
of the information and the binding edge of the originals (see 'Prepare the
scan job' on page 141).
Press the combine key .
7
The job part is scanned.
[104] Scan next job part
[104] Scan next job part
Repeat steps 2, 5, 6 and 7 for each next job part.
8
[105] Finish the job
[105] Finish the job
Press the start key
9
Press the start key
10
The request, to confirm the end of the job, can be disabled by the Key
Note:
Operator.
156
Océ VarioPrint 2045-65 NC Job Manual
to finish the job.
to confirm the end of the job.