Oce VarioPrint 2045-65 NC Job Manual page 134

Wait until the interrupt symbol
2
[86] The interrupt mode is entered
[86] The interrupt mode is entered
Enter the settings for a new job.
3
Press the start key
4
[87] Start a job in the interrupt mode
[87] Start a job in the interrupt mode
Repeat steps 3 and 4 for each subsequent job, if present.
5
Press the interrupt key
6
The suspended copy job will continue.
[88] The suspended job continues
[88] The suspended job continues
The Océ VarioPrint 2045-65 NC automatically quits the interrupt mode
Note:
two minutes after the last job.
132 Océ VarioPrint 2045-65 NC Job Manual
is displayed in the message box.
to start the new job.
to quit the interrupt mode.