Print Loop Outputs; Program Panel Outputs - Kidde Fire Protection ANTARES Manual

O/P 122 S L 01 D058
O/P 125 S L 01 D023
O/P 112 R L 02 D067
O/P 120 S L 02 D023
THU 24 NOV 21:45
LOOP OUTPUT DEVICE LIST

3.4.3 Print Loop Outputs

The sixth menu option provides the second part of the listing for the loop outputs. Having
defined the output numbers this listing identifies the input devices that will activate the loop
outputs. The format is very similar to the panel outputs listing and the display and print out
formats are illustrated below.
TUE 15 MAR 21:45 PRINT LOOP ACTIVITIES
LOOP 01 DEVICE 012
LOOP 01 DEVICE 034
LOOP 02 DEVICE 024
O/P 16 CLEARED ON 'S'
LOOP 01 DEVICE 080
LOOP 02 DEVICE 066
O/P CLEARED ON 'R'
THU 24 NOV 21:45
LOOP O/P ACTIVE LIST

3.4.4 Program Panel Outputs

The option of sixty four programmable outputs can be provided by the addition of the appropriate
output cards to the standard panel. These outputs can drive LEDs or relays and suitable modules
are available to give volt free outputs and monitored sounder outputs.
Any device on any loop can operate any one or more of the 64 outputs. Each output can be
programmed to be cleared on either by SILENCE ALARMS or PANEL RESET.
TUE 15 MAR 21:45 PROGRAM PANELS OUTPUTS
TM0064
LOOP O/P ACTIVE LIST
OUTPUTS ? S L D
Page 63 of 91
Fig 3.4.5
Fig 3.4.6
Issue 2.01