Kidde Fire Protection ANTARES Manual page 58

No more files
DEL to scroll again
EXE to quit
The EXE key will revert the Psion back to the keypad mode and the panel to the 'LOOP
REQUEST' level. Otherwise the files can be examined again and the required one selected.
If editing has been carried out on the file, the loading of the device numbers, to the panel, will
not necessarily be in numerical order.
Unit
Unit allows the direct modification of a single message within the panel. Caution must be
exercised when using this option as it does not modify the back up copy file. This should be done
at the same time using the Edit option.
When selected the display will indicate the mode and request the device number whose message
is required to be modified, see fig 3.3.18.
Read Single Message
Device no.
The device number is entered into the Psion and it will then request the message, see fig
3.3.19.
Send Single Message
Device no 10
Input message
This is entered and modified as described above upon acceptance the display will request the
zone number, see fig 3.3.20.
Device no. 10
Input message
Main restaurant
TM0064
Fig 3.3.17
Fig 3.3.18
Fig 3.3.19
Zone no.
Fig 3.3.20
Page 58 of 91 Issue 2.01