Table of Contents
Advertisement
TUE 15 MAR 21:45 MESSAGE HANDLER
TUE 15 MAR 21:45 LOAD/SAVE PROGRAM DATA
The complete set of menu options are described in Sections 3.2, 3.3 and 3.4 for Menu 2 and
Menu 3 respectively.
3.2
MENU ONE OPTIONS
To enter any menu the panel must be in the ACCESS mode as described in Section 1.1.1.
Menu level one can now be entered by pressing any key on the keypad. On pressing a key the
first option will be displayed.
To scroll through the options press the CANCEL key.
To select the option press the ENTER key.
Seven options are available:
1.
Isolate devices
2.
Set time
3.
List loop devices
4.
List isolated devices
5.
Select test mode
6.
LED test
7.
Printer status- only displayed if configured
The seven options are described in the following sections
Isolate Devices
3.2.1 Isolate Devices
TUE 15 MAR 21:45 ISOLATE A DEVICE
With the display as indicated above the ISOLATE DEVICES mode can be entered by
pressing the ENTER/YES key. The display will immediately indicate the single device select
mode, as in fig 3.2.2.
TM0064
REFER TO REMOTE COMPUTER
Fig 1.1.6.3
REFER TO REMOTE COMPUTER
Fig 1.1.6.4
Fig 3.2.1
Page 45 of 91
Issue 2.01
Advertisement
Table of Contents
