Table of Contents
Advertisement
SAFETY
The power supply is designed to meet the requirements of the following safety standards:-
IEC 950/EN60950
UL 1950
RFI/EMI
The power supply design aim is to meet the requirements of the following RFI/EMI standards,
as a stand alone unit:-
FCC 207080
EN 55022
VFG 243
*
System noise levels may require the use of an enhanced filter to meet RFI limits.
ENVIRONMENTAL
IEC 68
CONNECTORS
Input
accepting 4.0mm² cable.
Output Screw terminal connector providing the necessary number of ways to
provide outputs for VO1 & VO2, LED drives, signals, and test loads.
TM0064
Safety of Information Technology Equipment
Electronic Data-Processing Units & Systems.
Federal Communications Commission (USA) Level A
Radio Interference Suppression of Radio Frequency for
Equipment, Level B.
German EMC Standard
Tests and methods as specified in EN 54-4.
6 connection touch proof screw terminal block, with built in integral
creepage and clearance, to comply with EN 60950.
Connectors to be mounted upon the top of the case, and capable of
2 ways for incoming live
2 ways for incoming neutral
2 ways for incoming earth
Connectors to be capable of accepting 4.0mm² cable.
Page 23 of 91
Issue 2.01
Advertisement
Table of Contents
