Kidde Fire Protection ANTARES Manual page 56

To prevent accidental erasure of the message memory an intermediate ARE YOU SURE ?
request is made. The option can be terminated using the Psion DEL key or accepted by using the
Psion EXE key.
TUE 15 MAR 21:45 MESSAGE HANDLER
If accepted the display will indicate for a few seconds that the memory is being cleared after
which the display will return to menu two, option one. Again if the printer is enabled a hard copy
of the CLEARING MESSAGE MEMORY will be obtained.
Load/Save
When this option is selected the panel will request that a loop number is entered. This is done
in the normal manner and when a relevant loop is accepted the panel will transfer the display
control to the Psion, see fig 3.3.12.
TUE 15 MAR 21:45 MESSAGE HANDLER
As described in section 3.1.6 and 3.1.7, connect the Psion and select Cpanel operation.
The options now available will be displayed on the Psion LCD, see fig 3.3.13. Four options are
available; Send, Unit, Load and Quit. The options can be selected by moving the cursor (using
the arrow keys) to the required option and then operating the EXE key or simply by operating the
alpha key corresponding to the first character of each option. The Quit option returns the system
to the loop number request mode, i.e. the first level of the Message Handler. The other options
are described below:
1
Send
Quit
Send
TM0064
ARE YOU SURE?
Fig 3.3.10
CLEARING MESSAGE MEMORY
Fig 3.3.11
REFER TO REMOTE COMPUTER
Fig 3.3.12
Unit
Fig 3.3.1.3
Page 56 of 91
9.45p
Load
Issue 2.01