USC U-Batch Operator's Manual page 49

1. HYDRAULIC OPTION:
off. When it is active, it will be green.
2. MIX MOTOR START UP DELAY:
allowing the operator to enter the number of seconds from the time the mix motor start
button is pressed until the motor has reached the pre-defined speed. This must be
operating at that speed before the next step in the blending process can begin.
15 seconds is the default setting, this should work for most installations.
3. VFD TYPE:
Select the VFD type used in your control panel.
U-BATCH™ TREATER
SETPOINTS 4 SCREENS
Pressing this button toggles the hydraulic lift option on and
Pressing this button pops up a numeric keypad
1
2
3
Page 49