USC U-Batch Operator's Manual page 46

U-BATCH™ TREATER
SETPOINTS 1 SCREENS
1
3
3. CUSTOM PID SETTINGS:
Pressing this button advances the operator to the
Custom PID Settings screen. If the flow meter type is set to Custom, the PID settings
may need to be set on this screen (below).
This screen allows the operator to manually enter custom PID settings for single or
multiple head pumps. The system default settings are shown above. This screen
is only used when non-USC pumps are being used and even then it may not be
necessary to make any changes. If the operator has made changes and wants
to return to the default settings, they may change the entry in the first row and the first
column to zero, select the red X to exit the screen. This resets the screen to the
default settings.
Page 46