USC U-Batch Operator's Manual page 34

1
2
1. LIQUID NAME:
allowing the operator to change an existing chemical name. If an unused box was
selected from the list, the Name will be blank and the Calibration Ratio will be 1.0,
allowing the operator to enter a new chemical into the system. Once saved, it will
be added to the list.
2. CALIBRATION RATIO:
allowing the operator to manually enter the multiplier used for flow meter calibration.
. SCREEN EXIT:
3
It's functionality is the same throughout all of the HMI screens.
4. CALCULATOR:
Calculator screen (see page 35).
5. CLEAR:
This button deletes the name and resets the Calibration Factor to 1.00.
After a new name and calibration factor has been entered, press the save button.
This is another way to enter a new chemical name in the system.
6. SAVE:
Saves any changes to the chemical profile.
Page 34
U-BATCH™ TREATER
PUMP SCREEN
When this button is pushed an alpha numeric keypad appears
When this button is pushed a numeric keypad appears
This button is used to return to the previous screen.
Pressing this button takes the operator to the Calibration
3
4
5
6