USC U-Batch Operator's Manual page 47

1. MIX MOTOR FAULT:
operator to enter the number of seconds from the time the mix motor start button
is pressed to the alarm activating if the motor does not start.
2. IGNORE DISCHARGE SLIDE GATE FAULTS:
sensors are active and will alarm after a pre-defined number of seconds has passed,
and the gate has not moved after the OPEN or CLOSE button is pushed on the Gates
HOA screen. Pressing the button will turn the button red and make the gate sensors
inactive. With the sensors inactive, there will be no alarm if the gate fails to open
or close completely.
3. DISCHARGE SLIDE GATE OPEN FAULT:
numeric keypad allowing the operator to enter the number of seconds from the time
the Discharge Gate OPEN button is pressed to alarm if the gate does not fully open.
4. DISCHARGE SLIDE GATE CLOSED FAULT:
a numeric keypad allowing the operator to enter the number of seconds from the time
the Discharge Gate CLOSED button is pressed to alarm if the gate does not fully close.
U-BATCH™ TREATER
SETPOINTS 2 SCREENS
Pressing this button pops up a numeric keypad allowing the
When this button is grey, the gate
Pressing this button pops up a
Pressing this button pops up
1
2
3
4
Page 47