USC U-Batch Operator's Manual page 42

1
2
1. INLET GATE CONTROL MODULE:
slide gate. To manually open the gate you must press and hold the OPEN button for
two seconds. To manually close the gate you must press and hold the CLOSE button
for two seconds. The OFF button will disable the gate regardless of which position
it is in. The gate must be in AUTO mode for it to automatically open and close at the
appropriate time during a batch run.
2. DISCHARGE GATE CONTROL MODULE:
inlet discharge gate. To manually open the gate you must press and hold the OPEN
button for two seconds. To manually close the gate you must press and hold the
CLOSE button for two seconds. The OFF button will disable the gate regardless of
which position it is in. The gate must be in AUTO mode for it to automatically open
and close at the appropriate time during a batch run.
3. DISCHARGE GATE OPEN:
position.
4. DISCHARGE GATE CLOSED:
closed position.
Page 42
U-BATCH™ TREATER
H-O-A GATES SCREEN
This module controls the function of the inlet
This module controls the function of the
This indicator turns green when the gate is in the open
This indicator turns green when the gate is in the
3
4