USC U-Batch Operator's Manual page 27

When the indicators on items 4 - 11, 19, 21 and 23 have a square
NOTICE yellow border around the green indicator, they are operating
in HAND mode. HAND mode is the manual mode of operation.
4. INLET GATE:
This indicator will be green when the gate is being moved from
open to closed or closed to open.
5. PUMP:
This indicator turns green when the pump motor on the liquid pump stand
is running.
6. AUX 1:
This indicator turns green when the pump motor on the second liquid
pump stand is running if one is attached to the system.
7. AUX 2:
This indicator turns green when the pump motor on the third liquid pump
stand is running if one is attached to the system.
8. PURGE:
This indicator turns green when the solenoid opens the pneumatic valve
starting the flow of compressed air to the supply line on the top of the static mixer.
This will clear the supply line from the static mixer assembly to the supply ring located
in the bottom of the treating hopper. This function is controlled on the Pumps H-O-A
screen (see page 38).
9. POWDER:
This indicator turns green when the solenoid opens the pneumatic valve
starting the flow of compressed air to move the powder from the dry applicator stand
to the top of the treater. This function is controlled on the Pumps H-O-A screen
(see page 38).
10. LOWER:
This indicator turns green when the pump motor on the hydraulic treater
lift frame is lowering the treater. This indicator will only be present if the hydraulic lift
option is on the treater.
11. RAISE:
This indicator turns green when the pump motor on the hydraulic treater
lift frame is raising the treater. This indicator will only be present if the hydraulic lift
option is on the treater.
The indicators on items 12 - 16, display a green bar that starts
NOTICE on the left a progresses to the right showing the elapsed time
of the process that has been completed.
U-BATCH™ TREATER
MAIN SCREEN
Page 27