USC U-Batch Operator's Manual page 3

As the person with the most to gain or lose from working safely, it is important that you
work responsibly and stay alert. By following a few simple rules, you can prevent an
accident that could injure or kill you or a co-worker.

Disconnect, lockout, and tagout electrical and all other energy sources
before inspecting, cleaning, servicing, repairing, or any other activity that
would expose you to the hazards of electrical shock.

Do not operate, clean, or service this equipment until you have read and
understood the contents of this manual. If you do not understand the
information in this manual, bring it to the attention of your supervisor, or call
USC at (785) 431-7900 for assistance.

Any operator who is known or suspected to be under the influence of alcohol
or drugs should not be allowed to operate the equipment.

Understand and follow the safety practices required by your employer and
this manual.

PAY ATTENTION to what you and other personnel are doing and how these
activities may affect your safety.

Failure to follow these instructions may result in serious personal
injury or death.
As soon as the equipment is received, it should be carefully inspected to make certain
that it has sustained no damage during shipment and that all items listed on the
packing list are accounted for. If there is any damage or shortages, the purchaser
must immediately notify USC, LLC. Ownership passes to purchaser when the unit
leaves the USC, LLC. premises. The purchaser is responsible for unloading and
mounting all components of the equipment.
Document the serial number of the machine for future reference. The serialization
label is located on the base frame near the discharge chute.
SERIAL NUMBER:__________________________________
U-BATCH™ TREATER
RECEIVING YOUR EQUIPMENT
Serial
Number
Page 3