IBM Power System S822LC Manual page 125

Figure 127. Locking the system processor module into the tool
13. Holding the outside of the tool, lift the tool and system processor module from the old system
backplane socket to transfer it to the new system backplane socket.
14. Install the system processor module:
a. If dust or debris is present on the system processor socket, use the supplied air pump (part
number 45D2645) to clean the socket. Blow small bursts of air from the center toward the sides of
the socket, as shown Figure 128 on page 110.
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)
109