IBM Power System S822LC Manual page 153

Figure 156. Removing the gray-colored TIM from the processor
5. Remove dust and debris from the system processor module area. If dust or debris is present, use the
supplied air pump (part number 45D2645) to clean the system processor module area. Blow small
bursts of air from the center toward the sides of the system processor module as shown in Figure 157
on page 138. If your air pump is not assembled as shown in Figure 157 on page 138, fasten the tip
onto the bulb.
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)
137