IBM Power System S822LC Manual page 60
Hide thumbs
Also See for Power System S822LC:
- Servicing (146 pages) ,
- Installing the system and ordered parts (140 pages) ,
- Technical overview and introduction (80 pages)
Table of Contents
Advertisement
Figure 54. Location of the disk and fan signal cable and connectors
3. Release the cable from the retaining clip on the inside wall of the system.
4. Label and disconnect the disk and fan signal cable (A) from the disk drive and fan card (B) and from
the system backplane (C). Using your thumb, press the release latch on the connector to remove a
cable. See Figure 55 on page 45.
44
Power Systems: Servicing the IBM Power System S822LC (8335-GTB)
Advertisement
Table of Contents
