Figure 52. Routing the cables under the disk drive and fan card
4. Replace five screws for the bottom of the disk drive and fan card. Figure 53 shows all 12 screw
locations.
Figure 53. Screw locations for the disk drive and fan card
5. Replace five screws for the top of the disk drive and fan card.
6. Replace one screw in each side of the disk drive and fan card.
7. Using your labels, replace the disk drives and any fillers. For instructions, see "Replacing a disk
drive from the 8335-GTB system" on page 37.
8. Replace the fans. For instructions, see "Replacing a system fan in the 8335-GTB" on page 47.
42
Power Systems: Servicing the IBM Power System S822LC (8335-GTB)