IBM Power System S822LC Manual page 155

Figure 158. Lowering the removal tool onto the system processor module
c. With the removal tool (A) sitting on top of the system processor module, push down on the tool to
lock the system processor module into the tool as shown in Figure 159 on page 140. Make sure
that both of the tool jaws are locked on the system processor module. Do not press the blue
release tabs until directed to do so later.
Note: The tool drops slightly when you push down on the processor module so that the jaws can
grab the bottom of the module.
139
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)