IBM Power System S822LC Manual page 187

Figure 196. Tightening the cold plate retainer screw
c. Return the service hook to its latched position in the bracket.
10. Lightly grip the system processor module that you replaced by the edges and lift it off of the
packaging cover. Align the beveled corner of the module (A) to the corner of the packaging with
triangle (B) and place it in the packaging, as shown in Figure 197. Close the packaging cover.
Figure 197. Placing the system processor module into the packaging
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTB system for operation after
you remove and replace internal parts" on page 198.
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)
171