IBM Power System S822LC Manual page 74
Hide thumbs
Also See for Power System S822LC:
- Servicing (146 pages) ,
- Installing the system and ordered parts (140 pages) ,
- Technical overview and introduction (80 pages)
Table of Contents
Advertisement
Figure 71. Replacing the front USB cable into the system backplane
5. Replace the top and side screws for the power switch. See Figure 72.
Figure 72. Replace the top and side screws
6. Using the labels, plug the front USB cable (A) and the power switch and cable (B) to the system
backplane. See Figure 73 on page 59. Ensure that the cable latch clip snaps into place on the
connectors.
58
Power Systems: Servicing the IBM Power System S822LC (8335-GTB)
Advertisement
Table of Contents
