IBM Power System S822LC Manual page 169

11. Use this step to reuse the existing undamaged gray-colored TIM and heat sink.
a. Using the tweezers, move the old processor's TIM from the clean, dry surface and center it onto
the new system processor module. The gray-colored TIM has no preferred up side. The
gray-colored TIM can be placed on the processor and centered as shown in Figure 175.
Figure 175. Moving the gray-colored TIM onto the processor. The gray colored TIM has no preferred up side.
b. Place the heat sink on the TIM as shown in Figure 176 on page 154.
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)
153