Sensors And Switches; Rear Pto Speed Sensor - Valtra 6000 Workshop Manual

33. Agroline ---instrument

5. Sensors and switches

A. Gearbox speed sensor B6
(For monitoring the speed and distance)
Note! The sensor is placed in the lower part of the shuttle
housing on the RH side of the gearbox. The sensor is the
same as in the Agrodata ---instrument.
Note! If the driving speed and travelling distance values are
incorrect in the diplay, the reason can also be faulty calibra-
tion of the tyres, see page 333/4.
Note! The sensor resistance should be between 1,0 ---1,10
kΩ. It can be measured from pins X26/5 and X26/22.
If the resistance was infinite, it must be measured from sen-
sor poles, so that possible continuity problems can be iden-
tified.
B6
Changing the speed sensor, see page
Note! The instruction are as for Agrodata ---instrument but
connectors have differences, see wiring diagrams.
1. 9. 2002
B. Rear PTO speed sensor B7
(for monitoring PTO revs.).
The sensor is the same as in Agrodata ---instrument. The
sensor resistance should be 1,0 ---1,10 kΩ. The resistance
can be measured from pins X26/9 and X26/22.
If the resistance was infinite, it must be measured from sen-
sor poles, so that possible continuity problems can be iden-
tified.
Changing the sensor, see page 331/4
Note! The instruction are as for Agrodata ---instrument but
331/4.
connectors have differences, see wiring diagrams.
IMPORTANT! If the tractor has front PTO, the speed signals
comes from alternator or separate speed sensor.
The Agroline ---instrument has front PTO pilot light and its rota-
tion speed can be selected in the instrument LCD ---display.
111
Model Code Page
333
6200-- 8950Hi
B7
7