Fieldmaster - Valtra 6000 Workshop Manual

33. FieldMaster

1. Description
Note! The function of the four keys
on the RH side of the display chan-
ges according to which one of the
menus is open. The buttons have
always the function which is shown
in the display beside the button.
FieldMaster is a combined performance monitor which can
monitor both tractor and implement functions.
FieldMaster monitors the following tractor func-
tions:
--- driving speed, km/h,
--- wheel slip (radar is required))
--- PTO shaft rotating speed, rpm
--- distance travelled, km
--- area, ha
--- time functions (clock, elapsed time, remaining time etc).
FieldMaster can monitor the following implement
functions:
--- sprayers (l/hour, l/ha, litres, alarm functions, automatic
proportioning aso)
--- fertilizers (kg, kg/ha, kg/hour, rpm, alarm functions etc)
--- drills (kg/ha, seed amount in kilos, driving paths etc)
--- balers (pcs, kg, rpm, alarm functions etc)
--- slurry spreaders (ton/ha, tons, rpm etc)
--- other implements (e.g. cultivated area)
1. 8. 1998
Picture 1. FieldMaster display unit in the cab on the RH side.
The display shows three different functions at a time.
Function keys
Bushing this key returnes to the previous menu.
This button shows the tractor functions.
Display contrast button. In very hot or cold conditions the display
can be fully dark or light. With this button the display can be tried
to return to normal. The display becomes normal itself, when the
operating temperature becomes normal.
With this button can be added a bookmark on a certain page.
When the display shows another page, an operator can, by pus-
hing this button, return to the page where the bookmark is situa-
ting. This button functions only for one implement at a time.
This button has different functions depending on the selected
implement.
This button is used when coding together with the number keys.
Remove a selected character. This button also zeroes impulse
counters in the TEST FUNCTION mode. This button returns the
display contrast to the normal value.
This button switches on/off the display background light.
The number keys are used when inputting code values.
Options:
--- radar (slip, ground speed etc.)
--- writer (output of work etc.). The writer is connected with a
cable to the display unit.
--- readiness for the global location system with the aid of a
satellite (GPS)
The follow ---up of different functions on an implement
requires, that the implement has sensors which have been
connected to the FM via a socket in the rear of the tractor.
On an implement there can be e.g. rpm sensors, position
sensors, wheel sensors, flow meters, weight cells,
manometers, actuators/position potentiometers, level sen-
sors etc.
Note! This instruction does not handle operating instruc-
tions but it clears up the function of FieldMaster and a fault
tracing.
339
Model Code Page
6200-- 8750 332 1