Page 1
OPERATOR'S MANUAL T SERIES Versu YOUR WORKING MACHINE Ref no 39 885 21 4 ( 08/2015 )
Page 2
Find manuals at https://best-manuals.com...
Page 3
About this manual This operator's manual is for the Valtra T Series Versu tractors. The T Series Versu models are T144 V, T154 V, T174e V, T194 V, T214 V and T234 V. The manual is meant for agricultural tractors only. If the tractor is used for other applications, it is the owner's responsibility to ensure compliance with local regulations.
Page 4
Tractor serial numbers When ordering spare parts or service, give the model indication and serial numbers and, in some cases, the engine, front axle, cab and transmission numbers. GUID-83FD881F-92C4-4883-87A2-FEFA9521C800 1. Cab number and Type plate EEC • Model = model indication •...
Page 5
Contents Contents About this manual..................1 Tractor serial numbers.................2 1 Safety precautions................14 Hazard statements.....................14 Safety rules......................14 1.2.1 Replacing safety and information signs............14 1.2.2 Safety signs......................14 1.2.3 Maintaining hardware safety................23 1.2.4 Using safety features..................24 1.2.5 Safe operation....................27 1.2.5.1 Following safe operating practices..........27 1.2.5.2 Getting into and out of the cab............31 1.2.5.3...
Page 6
3 Operation....................68 Running the tractor in..................68 Preparing for use....................68 3.2.1 Adjusting the air-suspended driver's seat............68 3.2.2 Adjusting the Valtra Evolution driver's seat............71 3.2.3 Adjusting the right-side armrest................75 3.2.4 Adjusting the steering wheel................75 3.2.5 Adjusting standard mirrors................76 3.2.6...
Page 7
Contents 3.6.5 Fuel-operated heater..................104 3.6.5.1 Installing SIM card to the mobile controlled heater....104 Power outlets....................105 3.7.1 Lighter and power outlets................105 3.7.2 Using the two-pin current socket and power switch........106 3.7.3 Three-pin current socket................106 3.7.4 Trailer socket....................107 Driving the tractor.....................108 3.8.1 Notifications about steering................
Page 8
Contents 3.8.22.1 TwinTrac reverse drive system..........150 3.8.22.2 Activating and deactivating TwinTrac........151 3.8.22.3 Using TwinTrac with QuickSteer..........151 3.8.23 HillHold......................152 3.8.23.1 HillHold..................152 3.8.23.2 Using HillHold................152 Displays......................153 3.9.1 Adjusting display brightness................154 3.10 Proline instrument panel display..............155 3.10.1 Fixed views.....................155 3.10.2 Single-row and two-row views................156...
Page 9
Contents 3.12.11.2 Engine speed view..............187 3.12.11.3 Rear hydraulic valve settings view..........187 3.12.11.4 Front hydraulic valve settings view........... 187 3.12.11.5 Gearbox temperature view............188 3.12.11.6 Working hydraulics oil temperature view........188 3.12.11.7 Rear lower link position view............ 189 3.12.11.8 Wheel slip view................. 189 3.12.11.9 Working time view..............189 3.12.11.10...
Page 10
3.16.3 Setting front linkage lifting link positions............247 3.17 Valtra front loader.................... 248 3.17.1 Using the Valtra front loader................248 3.17.2 Using the Valtra Quick front loader coupling device........251 3.17.3 Using Softdrive....................251 3.17.4 Locking the equipment................... 252 3.17.5 Controlling the extra cylinder with the change valve........253 3.18 Power take-off....................253...
Page 11
Contents 3.19.7.2 Renaming a U-Pilot programme..........280 3.19.7.3 Removing a U-Pilot programme..........281 3.19.7.4 Recovering a deleted U-Pilot programme.........282 3.19.8 Editing U-Pilot programmes................282 3.19.8.1 Entering the programme editing view........282 3.19.8.2 Changing a programme function..........282 3.19.8.3 Removing a programme function..........283 3.19.8.4 Adding a new programme function...........
Page 13
Contents 4.7.4.17 Checking the oil level in front axle hubs........376 4.7.4.18 Changing oil in the hubs of the front axles with brakes.... 376 4.7.4.19 Changing the front PTO housing oil and washing the oil filter.. 377 4.7.4.20 Checking front PTO couplings..........378 4.7.4.21 Checking and greasing the trailer air-pressure brake system..
Page 14
Contents 4.8.8 Steering system....................433 4.8.8.1 Adjusting the steering angle............. 433 4.8.8.2 Calibrating the steering angle........... 434 4.8.9 Cab and shields....................436 4.8.9.1 Cleaning the cab ventilation air filter.........436 4.8.9.2 Cleaning the Skyview equipment cab ventilation air filter..437 4.8.9.3 Adjusting steps for driving off-road........... 439 4.8.9.4 Checking and adjusting front mudguards.........
Page 15
Contents 6.12.1 Front axle....................... 467 6.12.2 Turning circle....................467 6.12.3 Front axle suspension..................468 6.13 Cab and shields....................468 6.13.1 Cab filter capacity...................468 6.13.2 Windscreen washer..................468 6.13.3 Air conditioning system.................. 468 6.13.4 Noise level......................468 6.13.5 Exposure to vibration..................469 6.14 Hydraulic system....................469 6.14.1 Low-pressure circuit..................
Page 16
1. Safety precautions Safety precautions Always follow the safety precautions given when working with the tractor. The regulations given do not release the operator from statutory and other national regulations regarding traffic safety and occupational health and safety. In addition to the precautions given in this manual, always follow the safety regulations applicable to different types of working sites and existing road traffic laws.
Page 17
1. Safety precautions IMPORTANT: After maintenance work, all replacements for parts with a safety sign on them must include also the new safety sign. GUID-D80034FC-C7F4-4349-8B02-554747A5597B - 15 -...
Page 18
1. Safety precautions GUID-64799C1A-46B6-4665-82E2-95BD37BC93D9 Caution: Instructions on avoiding injuries during startup, driving and maintenance. Located inside the cab, below the left-hand side C-pillar. Warning: Country-specific warning concerning handling of the battery and its accessories. Located on the side of the battery casing. ATENCIÓN Los bornes de la batería y el resto de los accesorios relacionados...
Page 19
1. Safety precautions Sign indicating the location of emergency brake. Located inside the cab, next to the right-hand side control panels. Sign indicating an emergency exit. Located inside the cab on the rear window and on the right-hand side window. Danger: Country-specific warning that the battery and its accessories are dangerous to handle.
Page 20
1. Safety precautions Caution: During the connection of the front linkage to the shut-off valve, there must be no load on the front linkage or a rear implement connected to the same valve. The warning sign is located next to the shut-off valve at the back of the tractor.
Page 21
1. Safety precautions Warning: Country-specific sign indicating the standard distances related to PTO driveline. Located at the back of the tractor, on the left rear wheel mudguard. “A” 400mm (15.85 in) 400mm (15.85 in) 400mm (15.85 in) 400mm (15.85 in) “B”...
Page 22
1. Safety precautions Warning: The sign warns against several dangers: • exposed fan which can crush and cut • surfaces which can be hot • exposed belt drive which can cause severe injury Located under the bonnet, on both sides of the radiator.
Page 23
1. Safety precautions Warning: Country-specific sign notifying that the seat belt must be used when driving the tractor. Located behind the passenger seat. ATENCIÓN USE EL CINTURÓN DE SEGURIDAD Mantenga su cinturón ajustado cómodamente No salte si el tractor vuelca 39661600 Warning against standing directly behind the tractor when it is used.
Page 24
1. Safety precautions Country-specific warning concerning cabin tightness. Located in the cab, on the left side of the front housing. Country-specific signs located at the back of the tractor, on the left rear mudguard. Danger: Only approved parts in their correct position can be used for pulling. Danger: All equipment shields must be kept in place during operation.
Page 25
1. Safety precautions Country-specific safety signs located on the front housing, next to the fire extinguisher. Brand- PULVERSLÄCKARE Uppluckra pulvret minst en gång per vecka. släckare Kontrollera att manometern står på grönt. Country-specific notification concerning tractor approval. Located in the cab, on the front housing.
Page 26
Lock the brake pedals together whenever individual wheel brakes are not required and always when driving on the road. • Extensive repairs to the braking system should be undertaken only by an authorised Valtra workshop. • When implements or ballast weights are front-end-mounted, the rear axle loading is decreased.
Page 27
1. Safety precautions • Emergency exits Familiarise yourself with the three emergency exits of the tractor cab, that is, the door, the rear window and the roof hatch. If necessary, the right-side window can be broken and used as emergency exit. The windshield is polycarbonate and cannot be easily broken.
Page 28
1. Safety precautions • Roof hatch GUID-BA2C1723-EB95-4628-8964-6805ECBE1B9A 1. Direction for releasing the lock 2. Direction for detaching the spring 3. Safety sign for using the emergency exit 4. Gas springs with quick locks 5. Handle • Pull open the sunshade. •...
Page 29
1. Safety precautions • Emergency brake Use the emergency brake only in emergency situations if braking with brake pedals is not possible. WARNING: Turning the ignition switch to (OFF) position cannot be used as an emergency brake. The emergency brake operates only when the power is switched on.
Page 30
1. Safety precautions • Functionality of the auxiliary hydraulics on/off push button. ON/OFF GUID-D86EB646-4A12-4128-80C2-1547474AC4EE 1. Auxiliary hydraulics on/off push button Pressing the auxiliary hydraulics on/off push button turns off or on all the functions of the auxiliary hydraulics. The button has no effect on the functionality of the ON/OFF valves or the rear linkage.
Page 31
This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...
Need help?
Do you have a question about the T Series and is the answer not in the manual?
Questions and answers