Cabin Heater - Valtra 6000 Workshop Manual

CABIN HEATER, FITTING INSTRUCTION
Cab heater socket . . . . . . . . . . . . . . .
(Note! requires an engine heater). The mounting
kit includes the socket, wires and a branch con-
nector (to engine heater supply wire) with necess-
ary fitting details.
Cab heater . . . . . . . . . . . . . . . . . . . . . .
The heater has two output levels, 1100W / 550W
FITTING:
--- Remove the LH side engine side plate.
--- Make lead---in holes according to the picture
through the intermediate frame protective shield
and through the cab front wall.
Fit bracket 5 into position in holes on the battery
shelf and fasten the branch connector 1 onto the
bracket. Fasten socket 2 under the instrument
panel and pass the wire to the branch connector.
Disconnect the supply wire from the engine heater,
and connect it to the branch connector. Connect
the wire from the connector to the engine heater.
--- Drill for the cab heater 8 fastening holes and fit the
heater.
23.12.1994
32634800
32630300
7
5
6
563
Model
6000---8400 39
Move the cab type plate upwards
8
4
3
1
4
Code Page
1 (2)
2
3
4