Cruise Control; Cruise Control Switches - Valtra HiTech T3 Series Operator's Manual

Hide thumbs Also See for HiTech T3 Series:
Table of Contents

Advertisement

3. Operation
As the AdBlue fluid is very corrosive, if the tractor is splashed with fluid, wipe
off and rinse with water.
If an electrical connector is splashed with AdBlue fluid, it must be replaced.
Crystals of AdBlue/DEF additive may appear on the vehicle in the event of
spillage. Rinse immediately with water to remove these crystals.
IMPORTANT: Never put fuel in the AdBlue/DEF tank. Even small amounts of fuel
in the AdBlue/DEF tank may damage the gaskets of the selective catalytic
reduction (SCR) system.
IMPORTANT: Never put AdBlue/DEF in the fuel tank, as the engine and fuel
system may become damaged.
IMPORTANT: If the AdBlue/DEF additive is modified or replaced by another fluid,
which does not comply with standard ISO 22241 (DIN 70070), the after-treatment
system will be damaged!
3.8.14

Cruise control

The cruise control is extra equipment. With the cruise control function the
operator can choose either a constant driving speed or a constant engine speed.
When the cruise control is on, the indicator light is lit on the instrument panel and
the Proline instrument panel (alternative equipment) display shows the status of
the cruise control. Cruise control does not operate simultaneously with automatic
traction control.
There are two memory slots for driving speed settings and one memory slot for
engine speed settings.
3.8.14.1

Cruise control switches

1
2
3
GUID-59037F43-BDC0-4648-8E4E-B331033A9A75
1. Cruise control setting switch
2. Cruise control off button
3. Cruise control increasing/decreasing switch
Cruise control off button
With the cruise control off button, you can deactivate the cruise control.
- 108 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hitech t133 hHitech t153 hHitech t173 hHitech t193 h

Table of Contents

Save PDF