Assign Texts; Setting Values; Setting Values Switching Value On And Off - Siemens RMB795B Basic Documentation

Notes
Important

Setting values

Setting values
Siemens
Building Technologies
[Logic A] function
[Logic B] function
[Logic C] function
Logic relay
Operation selector
Time format
The format "h:m" can be used if an advanced time format is required for the logic
function (> 59.59 m:s).
The changeover impacts all time-related parameters of the logic function block
(switch-on/off delay and min. switch-on/off time).
The time format "h:m" can be set in 10-minute increments.
9.3

Assign texts

A specific text can be assigned to each logic and operation selector. This text
appears on the menu and in the operating line.
Main menu > Commissioning > Settings > ... or
Main menu > Settings > Logic functions > Logic 1...10 >
Operating line
Logic 1...10
Operation selector
1...10
Additional information on editable texts is available at Sec. 6.5.4.
9.4 Setting values
9.4.1 Switching value On and Off
The logic can process digital and analog signals. Setting values "[Logic x switching
value n] on" and "[Logic x switching value n] off" are used to convert a continuous
signal to a 2-position (on/off) signal.
Main menu > Commissioning > Settings > ... or
Main menu > Settings > Logic functions > Logic 1...10 >
Operating line
[Logic A switching value 1] on
[Logic A switching value 1] off
[Logic A switching value 2] on
[Logic A switching value 2] off
[Logic A switching value 3] on
[Logic A switching value 3] off
[Logic B switching value 1] on
[Logic B switching value 1] off
[Logic B switching value 2] on
[Logic B switching value 2] off
Central control unit RMB795B
Logic
AND, NAND, OR, NOR
AND, NAND, OR, NOR
AND, NAND, OR, NOR, EXOR, EXNOR
---, N.Q1, N.Q2, .../ (only free outputs)
Yes, no
h:m, m:s
Range
Max. 20 characters.
Max. 20 characters.
Range
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
Depending on selected type
OR
NOR
AND
---
No
m:s
Factory setting
Logic 1...10
Operation selector
1...10
Factory setting
Depending on type.
Depending on type.
Depending on type.
Depending on type.
Depending on type.
Depending on type.
Depending on type.
Depending on type.
Depending on type.
Depending on type.
85 / 144
CE1P3122en
18.01.2012