Siemens RMB795B Basic Documentation page 65

Note
Holidays: Explanation
Setting values
Explanations relating to
the setting values
Special days:
Explanation
Entry choices
Setting values
Siemens
Building Technologies
Setting Effect
Master The holiday / special day program in this
central control unit is active.
Holiday / special day program also acts on all
other devices where the holiday / special day
program is switched off (slave) and which lie
in the same holiday / special day zone.
Settings for holiday/special day zone is described in Sec. 13.2.2 "Room group
1...10
Holidays are periods of time when the building is not used and whose start and
duration are known in advance. Examples:
• Works holidays in commercially used spaces and buildings
• School holidays/vacation in school buildings.
• Public holidays.
It is possible to enter if during the holiday period operating mode
Protection is to be used.
Main menu > Room group 1...10 > Holidays / special days
Operating line
Room operating mode
holidays
When the RMB795B central control unit is connected to other devices via
communication, the operating mode selected here will apply to all devices in the
same holiday / special day zone.
Special days are periods of time when the building is used for special purposes
and whose start and duration are known in advance. Examples:
Visitor days in special homes.
Church holidays
An extra 24-hour program (special day) as a special day program can be entered
in the 7-day program, refer to Sec. 8.3.5 "7-day time switch" under "Setting
values").
When the RMB795B central control unit (master) is connected to other devices on
the bus (slaves) via communication, a specific 24-hour program (as a special day)
can be entered for each of these slaves. The time of the special day is
communicated, however, by the master and applies to all devices in the same
holiday / special day zone.
Calendar entries
A maximum of 16 calendar entries can be made. The central control unit sorts the
entries in chronological order. Each entry requires an entry of:
• Date, year and start time.
• Date and end time.
• Reason for entry (holidays or special day).
Main menu > Room group 1...10 > Holidays / special days > Calendar
Operating line
Entry 1...16
Central control unit RMB795B
Function block: "Room group"
Range
Economy,
Protection
Range
Start
End
Reason
Diagram
Economy or
Factory setting
Eco
Factory setting
65 / 144
CE1P3122en
18.01.2012