Siemens RMB795B Basic Documentation page 116

Overview
Setting values
Setting values
Note
Example 1
Data exchange concept
Configuration device 1
Device 2
Configuration diagram
116 / 144
Siemens
Building Technologies
Reception zones
Inputs (N.X1...A7(2).X4)
Main menu > Commissioning > Communication > LTE reception zones >
Operating line Range
N.X1...A7(2).X4 ---, 1...4095
Main menu > Commissioning > Communication > LTE transmission zones >
Operating line Range
N.X1...A7(2).X4 ---, 1...4095
N.Q1...A7(2).Q5
N.Y1...N.Y2
Bus signals can be simulated using the "Simulation inputs" function when
commissioning the plant (Section 7.1.4).
The air quality value for an air quality sensor is available on one RMB795B
(device 1). This value is sent as a transmission object via an analog input and
processed by an RMB795B (device 2).
The following transmission and reception zones are engineered for example tasks:
RMB795B, device 1
Terminal Transmissi
on zone
N.Y1 1
= Transmit
= Receive
In RMS705B, device 1, the following is configured:
Main menu > Commissioning > Communication > LTE transmission zones >
Operating line
N.X1
In RMS705B, device 2, the following is configured:
Main menu > Commissioning > Extra configuration > Input identifier >
Operating line
N.X1
Main menu > Commissioning > Communication > LTE reception zones >
Operating line
N.X1
Unit 1
Central control unit RMB795B
Communication
Transmission zones
Inputs (N.X1...A7(2).X4)
Digital outputs (N.Q1...A7(2).Q5)
Analog outputs (N.Y1...N.Y2)
RMB795B, device 2
Terminal Reception
zones
N.X1 1
Range
1
Range
ppm
Range
1
Zone 1
KNX
Factory setting
---
Factory setting
---
Value
Indoor air quality
Factory setting
Factory setting
Factory setting
Unit 2
CE1P3122en
18.01.2012